General Purpose Logo

Syndev® Silicone Sheeting

Syndev® - Non-Standard Silicone Sheeting
Available by Category

Syndev® is a registered trade mark of Synergy Devices Limited

 

 


Product Name
Thickness
Inches/mm/microns
Durometer
Vulcanized
Reinforced
Price
Category
CSM82-4905-10
0.010” (0.25mm) 250µm
A-5
Y
N
G
           
           
MED90-5000-10
0.010” (0.25mm) 250µm
A-50
N
N
D
MED90-5000-20
0.020” (0.50mm) 500µm
A-50
N
N
D
MED90-5000-30
0.030” (0.76mm) 760µm
A-50
N
N
D
MED90-5000-40
0.040” (1.01mm) 1010µm
A-50
N
N
D
MED90-5000-60
0.060” (1.52mm) 1520µm
A-50
N
N
D
MED90-5010-10
0.010” (0.25mm) 250µm
A-50
Y
N
D
MED90-5010-12
0.012” (0.30mm) 300µm
A-50
Y
N
D
MED90-5010-60
0.060” (1.52mm) 1520µm
A-50
Y
N
D
MED91-5000-10
0.010” (0.25mm) 250µm
A-50
N
Y
E
MED91-5000-20
0.020” (0.50mm) 500µm
A-50
N
Y
E
MED91-5000-30
0.030” (0.76mm) 760µm
A-50
N
Y
E
MED91-5000-40
0.040” (1.01mm) 1010µm
A-50
N
Y
E
MED91-5000-60
0.060” (1.52mm) 1520µm
A-50
N
Y
E
MED91-5010-10
0.010” (0.25mm) 250µm
A-50
Y
Y
E
MED91-5010-20
0.020” (0.50mm) 500µm
A-50
Y
Y
E
MED91-5010-40
0.040” (1.01mm) 1010µm
A-50
Y
Y
E
MED92-8010-15
0.015” (0.38mm) 380µm
A-80
Y
N
D
MED92-8010-18
0.015” (0.38mm) 380µm
A-80
Y
N
D

 

  • Customization or special requests will be accepted on a case by case basis, and require a £1500 Development Fee.
  • The sheeting will be made from materials that already have masterfile and compendium support.
  • Tolerances on sheeting thickness are typically +/- 10% thickness values.
  • Durometer measurements are made on the base material per NuSil TM006.
  • Combination sheeting of Vulcanized on 1 side and Unvulcanized on the other side will be priced as 2 separate sheets. All applications of this type must be quoted prior to development, and will be made to order.
  • Double reinforcement with Polyester mesh is available upon request as a custom product.
  • Different Durometers between 30-80 Shore A may be developed upon request from standard base HCRs for £500 set up fee. Durometers below 30 may be too soft to run on the equipment, but may be evaluated as a custom development request for £1500 or more, depending on the complexity of the application.
  • All pricing is subject to Polymer Systems Technology Limited Terms & Conditions

 

 

Updated Thursday, March 24, 2011 17:22
#Cookies set! #Google set! #Piwik set!